Home > Products >Passive Video ,Power , Audio & Data Converter



1-CH Passive Video ,Power , Audio & Data Converter (Transmitter)
•12VDC/ 24VAC/ 28VAC output are all workable
•Color Video + Power + Audio + PTZ Data up to 984ft(300m) for 12VDC output camera
•Color Video + Power + Audio + PTZ Data up to 328ft(100m) for 24VAC output camera
•RJ45 Jack for UTP cat5e/6 cable
•Male BNC with extended mini-coax pigtail
•RJ45 Jack for UTP cable
•NTSC, PAL & SECAM video format compatible
•Real-time transmission
•No power required
•Exceptional interference rejection
•Built-in TVS(Transient Voltage Suppressors) for surge protection
•Lightning protection design Grade:III
•50 dB crosstalk and noise immunity
•Wave Filter Design, Anti-Static Design
•Compact size and easy installation
•ABS engineering plastic housing

  • Details
  • Specifications
  • Wiring Diagram
  • Download

The FS-4302VPADT is a passive (non-amplified) device that allows the transmission of real-time CCTV video, power, audio and data signal via one cost-effective Unshielded Twisted Paired(UTP) cable. Baseband (composite) signals of any type are support.

Used with 4/8/16 port 24V/28VAC power receiver hub, FS-4302VPADT eliminates costly and bulky coaxial cable, allowing live CCTV color video signal up to 1312ft (400m),power transmission up to 984ft(300m), audio signal up to 984ft(300m) and PTZ signal up to 984ft(300m) for 12VDC output camera. and power up to 328ft(100m) for 24VAC output camera.

The superior interference rejection and low emissions of the FS-4302VPADT allow video signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. FS-4302VPADT has built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.



• Security Monitoring System

• Multimedia Network Teaching System

• Medical Monitoring Display System

• Industrial Automation Control System

• Banking, securities, financial information display system

• Remote Network Server Monitoring

• Department Store Security

• Casino Security

• Hospitals, Airports and banks

• School Campuses


Wire and Cable Recommendations

FS-4302VPADT is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG..Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.


  • Accessories