Home > Products >Video , Power & Data Server



16-CH 28VDC Power Supply Passive Video Receiver Hub with Data transmission
•Provides camera power while receiving video, & data transmission both over a single 4-pair UTP cat5e/6 cable
•Power camera; Max 1 A per channel
•Input power 176 --264 VAC/90-130VAC
•Color Video+Power+PTZ Data up to 984ft(300m) with FS-4301VPDCT for 12VDC output camera
•emale BNC connector and RJ45 Jack
•NTSC, PAL & SECAM video format compatible;
•Real-time transmission;
•Exceptional interference rejection;
•Built-in TVS for surge protection & ground loop isolation
•Lightning protection design Grade:III
•Wave Filter Design, Anti-Static Design
•Black galvanized housing
•1.5U, rack,wall and desk installation with 4 rubber feet

  • Details
  • Specifications
  • Wiring Diagram
  • Download

Folksafe FS-4616VPDS-28VDC is a sixteen channel video, power,and data control signal hybrid receiver that consolidates all CCTV system cabling using standard EIA/TIA 568A/B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, FS-4616VPDS-28VDC allows the real time transmission of CCTV video signal via cost-effective Unshielded Twisted Paired(UTP) cable. Baseband (composite) signals of any type are supported.

 Working with FS-4301VPDCT, it can transmit the camera video, power and data hybrid signal up to 984ft/300m for 12VDC output camera.

The superior interference rejection and low emissions of the FS-4616VPDS-28VDC allows video, power,and data signals to co-exist in various environment. Compared with traditional video receiver, FS-4616VPDS-28VDC greatly reduces the cost and improves the performance. Compared with other similar products, Folksafe FS-4616VPDS-28VDC has higher performance, better stability, and more obvious price advantage. 



• Security Monitoring System

• Multimedia Network Teaching System

• Medical Monitoring Display System

• Industrial Automation Control System

• Banking, securities, financial information display system

• Remote Network Server Monitoring

• Department Store Security

• Casino Security

• Hospitals, Airports and banks

• School Campuses


Wire and Cable Recommendations

 FS-4616VPDS-28VDC is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG..Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.


  • Accessories