Home > Products >Video/Power/Audio Balun



1-CH Passive Video ,Power & Audio Transceiver (12V/24V DC/AC)
•Transmit power signal up to 656ft(200m) in pairs
•Color video up to 1312ft(400m) via UTP cat5e/6 cable
•Audio signal up to 1968ft(600m) in pairs
•NTSC, PAL & SECAM video format compatible
•Real-time transmission
•RJ45 Jack for UTP cat5e/6 cable
•Male BNC with extended mini-coax pigtail
•No power required
•Exceptional interference rejection
•Built-in TVS(Transient Voltage Suppressors) for surge protection
•Lightning protection design Grade:III
•50 dB crosstalk and noise immunity
•Wave Filter Design, Anti-Static Design
•Compact size and easy installation
•ABS engineering plastic housing

  • Details
  • Specifications
  • Wiring Diagram
  • Download

The FS-4301VPA is a passive (non-amplified) device that allows the transmission of real-time CCTV video , power and audio signal via one cost-effective Unshielded Twisted Paired(UTP) cable. Baseband (composite) signals of any type are supported.

Used in pairs, FS-4301VPA eliminates costly and bulky coaxial cable, allowing live CCTV color video, power and audio signal up to 656ft(200m).

The superior interference rejection and low emissions of the FS-4301VPA allow video signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. FS-4301VPA has built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.



• Security Monitoring System

• Multimedia Network Teaching System

• Medical Monitoring Display System

• Industrial Automation Control System

• Banking, securities, financial information display system

• Remote Network Server Monitoring

• Department Store Security

• Casino Security

• Hospitals, Airports and banks

• School Campuses


Wire and Cable Recommendations

FS-4301VPA is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG..Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.


  • Accessories