Home > Products >Active Video Receiver Hub



16-Channel Active Video Receiver Hub
•Full-motion color video signal up to 3936ft(1200m) via UTP cat5e/6
•NTSC, PAL & SECAM video format compatible
•Real-time transmission
•100-240V power supply, 50~60Hz
•Adjustable for various video distance
•Female BNC connector
•RJ45 and detachable terminal blocks for UTP cat5e/6
•Video Present LED indicators for each channel
•Compatible with qualified UTP camera
•Exceptional interference rejection
•70 dB crosstalk and noise immunity
•Full ground-loop immunity
•Built in TVS(Transient Voltage Suppressors) for surge protection
•Lightning protection design Grade: V
•Compact size and easy installation
•High-Density 19", 1U rack mount, wall mountable and desk installation via 4 rubber feet
•Black galvanized housing

  • Details
  • Specifications
  • Wiring Diagram
  • Download

The FS-4616R video balun hub is a active (amplified) device that allows the transmission of real-time CCTV video signal via cost-effective Unshielded Twisted Paired(UTP) cable. Baseband (composite) signals of any type are supported.

The FS-4616R is a compact unit. RJ45 and pluggable screw terminal blocks of FS-4616R allows easy connection of UTP cable input. It receives 16 channel video signal from camera end via 4 UTP cable at distance up to 3936ft(1200m)when used with active video transmitter. The transmission distance reaches up to 2296ft(700m)when used with passive transmitter.

The FS-4616R has a single video distance adjustment as well as built-in surge suppressor to protect video equipment against damaging voltage spikes.Its Integrated Ground Loop isolation prevents annoying "hum-bars" common with long distance installations and its excellent crosstalk and noise immunity provides quality video up to the maximum distance.The superior interference rejection and low emissions of the FS-4616R allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.



• Security Monitoring System

• Multimedia Network Teaching System

• Medical Monitoring Display System

• Industrial Automation Control System

• Banking, securities, financial information display system

• Remote Network Server Monitoring

• Department Store Security

• Casino Security

• Hospitals, Airports and banks

• School Campuses


Wire and Cable Recommendations

FS-4616R is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG..Individually shielded pairs should be avoided,as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

 For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.


  • Accessories