Home > Products >Active Video Receiver (dual video output)



Single Channel Active Video Receiver (dual video output)
•Color video up to 5904ft(1800m) with active transmitter via UTP cat5e/6 cable
•Color video up to 3936ft(1200m) with passive transmitter via UTP cat5e/6 cable
•Automatic Gain Control; Automatically adjust the distance
•Automatically adjust brightness,sharpness & saturation to reach optimum effect
•Power Polarity Automatic Identification; positive/negative pole able to be reversal
•Video Polarity Automatic Identification; positive /negative pole able to be reversal
•12V/24V DC/AC power supply
•Integrated 2 channel video distribution amplifier allows dual video output
•Female BNC connector
•Pluggable screw terminal block or UTP
•Exceptional interference rejection
•70 dB crosstalk and noise immunity
•Full ground-loop immunity
•Built in TVS(Transient Voltage Suppressors) for surge protection
•Lightning protection design Grade:V
•Compact size and easy installation
•Silver galvanized housing

  • Details
  • Specifications
  • Wiring Diagram
  • Download

The FS-1801R video balun is a active (amplified) device that allows the transmission of real-time CCTV video signal via cost-effective Unshielded Twisted Paired(UTP) cable. Baseband (composite) signals of any type are supported.

The FS-1801R is a compact unit. The power requirement is 12V/24V DC/AC. The pluggable screw terminal block of FS-1801R allows easy connection of UTP cable input. It receives one single channel video signal from camera end via one UTP cable at distance up to 5904ft(1800m) when used with active video transmitter. The transmission distance reaches up to 3936ft(1200m) when used with passive video transmitter. Its integrated 2 channel video distribution amplifier allows dual output to display video at both monitor and DVR.

The FS-1801R has AGC function, which means the brightness,sharpness & saturation can be automatically adjusted as per the transmission distance.It is built-in surge suppressor to protect video equipment against damaging voltage spikes. Its Integrated Ground Loop Isolation prevents annoying "hum-bars" common with long distance installations and its excellent crosstalk and noise immunity and provides quality video up to the maximum distance.The superior interference rejection and low emissions of the FS-1801R allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.



• Security Monitoring System

• Multimedia Network Teaching System

• Medical Monitoring Display System

• Industrial Automation Control System

• Banking, securities, financial information display system

• Remote Network Server Monitoring

• Department Store Security

• Casino Security

• Hospitals, Airports and banks

• School Campuses


Wire and Cable Recommendations

FS-1801R is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG..Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.


  • Accessories