Home > Products >Active Video Receiver Hub(dual video output)



8-Channel Active Video Receiver Hub(dual video output)
•Color video up to 5904ft(1800m) with active transmitter via UTP cat5e/6 cable
•Color video up to 3936ft(1200m) with passive transmitter via UTP cat5e/6 cable
•Automatic Gain Control; Automatically adjust the distance
•Automatically adjust brightness,sharpness & saturation to reach optimum effect
•Power Polarity Automatic Identification; positive/negative pole able to be reversal
•Video Polarity Automatic Identification; positive /negative pole able to be reversal
•100-240V power supply, 50~60Hz
•Integrated 2 channel video distribution amplifier allows dual video output
•Female BNC connector
•RJ45 and detachable terminal blocks for UTP cat5e/6
•Video Present LED indicators for each channel
•Compatible with qualified UTP camera
•Exceptional interference rejection
•70 dB crosstalk and noise immunity
•Full ground-loop immunity
•Built in TVS(Transient Voltage Suppressors) for surge protection
•Lightning protection design Grade: V
•Compact size and easy installation
•High-Density 19", 1U rack mount, wall mountable and desk installation via 4 rubber feet
•Black galvanized housing

  • Details
  • Specifications
  • Wiring Diagram
  • Download

The FS-1808R video balun hub is a active (amplified) device that allows the transmission of real-time CCTV video signal via cost-effective Unshielded Twisted Paired  (UTP) cable. Baseband (composite) signals of any type are supported.

The FS-1808R is a compact unit. RJ45 and pluggable screw terminal blocks of FS-1808R allows easy connection of UTP cable input. It receives 8 channel live CCTV  video signal from camera end via 2 UTP cable at distance up to 5904ft(1800m) when used with active video transmitter. The transmission distance reaches to 3936ft(1200m) when used with passive transmitter.Its integrated 2 channel video distribution amplifier allows dual video output to display at both monitor and DVR.

The FS-1808R has AGC function, which means the brightness,sharpness & saturation can be automatically adjusted as per the transmission distance.

It is built-in surge suppressor to protect video equipment against damaging voltage spikes. Its Integrated Ground Loop Isolation prevents annoying "hum-bars" common with long distance installations and its excellent crosstalk and noise immunity and provides quality video up to the maximum distance.The superior interference rejection and low emissions of the FS-1808R allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.



• Security Monitoring System

• Multimedia Network Teaching System

• Medical Monitoring Display System

• Industrial Automation Control System

• Banking, securities, financial information display system

• Remote Network Server Monitoring

• Department Store Security

• Casino Security

• Hospitals, Airports and banks

• School Campuses


Wire and Cable Recommendations

FS-1808R is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG..Individually shielded pairs should be avoided,as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

 For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.


  • Accessories